Call Today
1-800-349-0023
Stainless steel is renowned for its corrosion resistance, strength, and versatility—making it a top choice across industries such as aerospace, medical devices, food processing, and construction. However, when it comes to machinability, stainless steel presents unique challenges that require careful planning, tooling, and process optimization. Whether you’re drilling, turning, or milling, understanding how different grades behave during machining is critical for productivity, tool life, and surface finish.
Machinability refers to how easily a material can be cut, shaped, or finished using machine tools. It is influenced by:
Material hardness and toughness
Work hardening behavior
Heat conductivity
Chip formation characteristics
Stainless steel is generally harder to machine than carbon steel, due to its high strength, work hardening rate, and low thermal conductivity, which can lead to heat concentration at the cutting edge.
Not all stainless steels are created equal in terms of machinability. Here’s a brief overview of common categories:
Most widely used stainless steels
Excellent corrosion resistance, but poor machinability
Tend to work harden rapidly
Require sharp tools, controlled speeds, and aggressive feeds
Machinability rating: ~45% (compared to 1212 free-machining steel)
Moderate corrosion resistance
Better machinability than austenitics
Lower work hardening
Machinability rating: ~50–60%
Heat-treatable for high hardness
Better chip control, but tool wear increases with hardness
Often used in cutlery and wear-resistant applications
Machinability rating: ~55–60%
High strength, good machinability in solution-annealed condition
Often used in aerospace and structural components
Machinability rating: ~60–65%
Modified with sulfur or selenium to improve chip formation
Easier to machine but slightly reduced corrosion resistance
Ideal for high-volume precision parts
Machinability rating: ~70–85%
Work Hardening:
Stainless steels tend to harden at the point of cut, increasing tool wear and requiring higher cutting forces.
Heat Generation:
Low thermal conductivity causes heat to build up at the cutting zone, risking tool damage or dimensional instability.
Tool Wear:
Hardness and toughness of the material accelerate wear on tools, especially if improper feeds or speeds are used.
Built-Up Edge (BUE):
Material adhesion to the tool tip can degrade surface finish and accuracy.
To overcome the challenges of machining stainless steel, manufacturers can apply the following strategies:
Use carbide tools with coatings (TiAlN, TiCN) for better heat resistance
Choose sharp geometries to minimize cutting forces and work hardening
Use indexable inserts for consistent performance and cost control
Run at lower cutting speeds but higher feed rates to reduce heat buildup
Use cutting data specific to the grade being machined
Flood or high-pressure coolant helps remove heat and flush chips
Consider using emulsion coolants for improved lubricity
Aim for short, broken chips by using chip breakers and proper feed rates
Monitor chip color and shape to assess cutting conditions
Minimize vibration with stable fixturing and proper tool holding
Use rigid lathes, mills, or CNC machines to maintain precision
While stainless steel is not the easiest material to machine, the right combination of material selection, tooling, and machining parameters can yield high-quality results and cost-effective production. Understanding the machinability of various stainless steel grades helps manufacturers tailor their processes to balance tool life, productivity, and finish quality.
With ongoing advances in tool technology and machine control, even traditionally challenging materials like stainless steel are becoming increasingly manageable and efficient to machine—ensuring they remain a cornerstone in modern manufacturing.
